Crown-audio DCi Series – Network Input Models Manuel d'utilisateur télécharger pdf (Page 19)

DriveCore Install Network Series Power Ampliﬁers

page 19

Operation Manual

Set-up and System Conguration

Cascading Inputs

Cascading the analog inputs, or "Y-ing channels" gives more ﬂexibility to the installation of this ampliﬁer (See Figure 9). One input can be used to drive some or all of the

ampliﬁer outputs. NOTE: By cascading the inputs, the corresponding input DSP functions for individual channels will be removed and only the output DSP functions will be

available (See Figure 10).

Figure 9 Use the "Y 1+2" etc. check boxes to cascade channel inputs

Figure 10 With the "Y 1+2" box checked, both output Ch.1 and Ch.2 are fed by input Ch.1 and input processing is organized accordingly.